|
|
|
|
|
|
|
|
|
Cowl Vent Repair Kit: Solves the problem of leaky cowls. Quick & easy to install. No welding or painting necessary. Kit includes all necessary hardware to repair leaky heater & vent ducts. The instructions, duct patches, & glue will let you do the job right!
FITS 1967-1968 COUGAR ONLY. ENTIRE KIT
If you have any questions on this piece or anything else for Your Cougar call John at 616-396-0390. Or email us at johnscougars@gmail.com.
|
Stop cowl leaks without costly repairs. Mildewed interiors can be a thing of the past without spending a small fortune on costly repairs. Cowl Cap fastens to the cowl grille to seal out rain & wash water. No installation is required-just twist the spring-loaded fasteners through the vent openings & the unbreakable cover forms a water tight seal.
If you have any questions contact us at johnscougars@gmail.com or give us a call at 616-396-0390.
|
|
|
|
|
|
|
|
|
|
|
|
JC-200 This panel is the Die-Satmped Steel panel for the Lower Rear Corner of the Quarter panel. It has reinforcing ribs, also breaks 1" over the trunk floor.
Measures 24" X 9 1/4". MADE IN USA!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
|
This panel is the panel for the Lower Rear Corner of the Quarter panel. It has reinforcing ribs, also breaks 1" over the trunk floor.
Measures 26 1/2" X 9 1/4". MADE IN USA!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
|
|
|
|
|
|
|
|
|
|
|
|
JC-400 This panel is the panel for the Lower Rear Corner of the quarter panel. It has reinforcing ribs, also breaks 1" over the trunk floor.
Measures 27 1/2" X 9 1/4".
MADE IN USA!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
|
This panel is made to repair the lower part of the front fender.
***PLEASE SPECIFY DRIVER'S OR PASSENGER'S SIDE WHEN ORDERING***
Driver's side is in stock. Passenger's side is sold out at the moment.
If you have any questions, contact us at johnscougars@gmail.com or give us a call at 616-396-0390.
|
|
|
|
|
|
|
|
|
|
|
|
JC-201. '67-'68 COUGAR Lower Rear Quarter Panel Repair Panel. This panel is the Die-Stamped Steel panel made by John's Classic Cougars to repair the Lower portion of the quarter panel BEHIND the rear wheel.
Panel measures 10" high. MADE IN USA!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
|
This is the REPRODUCTION panel for the Lower Quarter Panel in FRONT of the Wheel.
This is the Die-Stamped Steel panel that repairs the lower FRONT part of the quarter panel from the door to the FRONT of the wheel. Panel measures 10" high. MADE IN USA!
Both sides are now in stock.
Please specify Driver's or Passengers side when ordering.
Panel measures 10" high. Made in West Michigan by our expert craftsman to help you get YOUR COUGAR ready to drive and have fun with!
Another Quality Reproduction Made exclusively for John's Classic Cougars!
If you have any questions, contact us at johnscougars@gmail.com or give us a call at 616-396-0390.
|
|
|
|
|
|
|
|
|
|
|
|
1967-1968 Cougar NOS Stone Shield
For more information. email us at johnscougars@gmail.com or call John at 616-396-0390. **Can be delivered to our next swap meet or show.**
|
1969-1970 Cougar REPRODUCTION Passenger's Side Lower Rear Quarter Repair Panel
This panel is made to repair the lower part of the quarter panel BEHIND the rear wheel to the bumper. Panel measures 16" high.
Made in West Michigan by our expert craftsman to help you get YOUR COUGAR ready to drive and have fun with!
Another Quality Reproduction Made exclusively for John's Classic Cougars!
Driver's side only at this time.
If you have any questions, contact us at johnscougars@gmail.com or give us a call at 616-396-0390
|
|
|
|
|
|
|
|
|
|
|
|
1969-1970 Cougar REPRODUCTION Driver's Side Lower Rear Quarter Repair Panel
This panel is made to repair the lower part of the quarter panel BEHIND the rear wheel to the bumper. Panel measures 16" high.
Made in West Michigan by our expert craftsman to help you get YOUR COUGAR ready to drive and have fun with!
Another Quality Reproduction Made exclusively for John's Classic Cougars!
Driver's side only at this time.
If you have any questions, contact us at johnscougars@gmail.com or give us a call at 616-396-0390
|
JC-204 Our Newest Reproduction for YOUR Cougar. This is the METAL Panel that the back edge of the fuel tank mounts to.
MADE IN USA!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
|
|
|
|
|
|
|
|
|
|
|
1967-1968 Cougar Fiberglass Front Stone Shield. Panel that goes between the bumper and the grille.
Excellent quality and fit for your Cougar.
|
1967-1968 Cougar Deck Lid Filler Panel
This panel goes between the rear window and the deck lid.
We cannot ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
|
|
|
|
|
|
|
|
|
|
|
1969-1970 Cougar Deck Lid Filler Panel
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
1973 Cougar Fiberglass Front Stone Shield. Panel that goes between the bumper and the grille.
Excellent quality and fit for your Cougar.
|
|
|
|
|
|
|
|
|
|
|
|
1969-1970 REPRODUCTION Rear Spoiler. Paint to match your COUGAR.
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
JC-304 Our Newest Reproduction for YOUR Cougar. This is the METAL Panel that the back edge of the fuel tank mounts to.
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
MADE IN USA!
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
|
|
|
|
|
|
|
|
|
|
|
JC-203 1967-1968 COUGAR Trunk Floor Panel.
Made in West Michigan by our expert craftsman to help you get YOUR COUGAR ready to drive and have fun with!
Another Quality Reproduction Made exclusively for John's Classic Cougars!
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
JC-303-L This METAL Panel handmand in Holland, Michigan by our Expert Craftsman specifically for YOUR Cougar.
MADE IN USA!!!
Another Quality Reproduction Made for Your COUGAR by John's Classic Cougars!
We can ship this item to Canada through US Postal Service
**PLEASE NOTE: This item is too large to ship through US Postal Service out of the continental US.**
It can ONLY be shipped through BAX GLOBAL outside continental USA.
Much Higher Freight Charges Will Apply.
PLEASE CALL FOR DETAILS
|
|
|
